Show basket (0 Article) My accountShow saved listTo checkout

Psycho Paint™ Platinum Cure Silicone

Buy Smooth-On at FormX

Smooth-On is one of the worlds leading manufaturers 3D modeling materials such as mold-making, casting and special effects materials but also industrial casting resins, adhesives and equipment. FormX is main distributor of Smooth-On products in Europe.

Psycho Paint ™

Psycho Paint ™ is a versatile and easy to use platinum silicone paint base developed to help special effects and prosthetic artisans, doll makers, etc. easily create painted-on color effects for their platinum silicone creations. It is a two component translucent clear platinum-cure silicone that is used to make a base for color pigmenting. Once the desired color is attained, Psycho Paint ™ is thinned with a solvent. Thin layers of paint can be then be applied to a model's surface (made of Dragon Skin®, Ecoflex® or other platinum silicone) using an airbrush.

In addition to painting the exterior of a cast piece, you can apply Psycho Paint ™ to the inside of a platinum silicone or urethane rubber mold and then cast platinum silicone behind it. It can also be applied by brushing.

Technical bulletin Psycho Paint

Products

Psycho Paint™

  • Psycho Paint ™ /0,9 kg

    Psycho Paint ™ /0,9 kg

    51,49 EUR

  • Psycho Paint ™ /7,2 kg

    Psycho Paint ™ /7,2 kg

    353,10 EUR

Video
Instructions

Safety - Use in a properly ventilated area. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Wear vinyl gloves only. Latex gloves will inhibit the cure of the rubber.

Store and use all products at room temperature 23°C. This product has a limited shelf life and should be used as soon as possible. Silicone surfaces to be painted can only be Platinum (addition) cured systems. For optimum results the silicone skin/surface, should be painted as soon as possible after demolding. We recommend that the cured piece to be painted be no more than 2 days old.

Clean All Surfaces That Will Contact Psycho Paint ™ - All surfaces to be painted, need to be free of any contaminants (especially mold release). If necessary, clean all surfaces with solvent (NOVOCS™ Zero VOC Solvent, Toluene, Xylene, or Naptha), and allow to dry before painting.

Measuring Is Done By Volume -
The recommended mix ratio is 100 Parts A + 100 Part B + 200-500 Parts Solvent depending on your application (hand painting vs. airbrushing).

Adding Color To Psycho Paint™ - Silc Pig® silicone pigments are compatible with Psycho Paint ™. There are several colors to choose from, and you can mix colors to create custom colors. The most accurate way to add pigment is by weight (using a gram scale). We recommend beginning by pre-mixing 2% pigment by weight to Part B and pre-mixing thoroughly. Do not exceed a 5% pigment load of the total weight (A+B). You can also use powdered cosmetic pigments to color Psycho Paint™, however a compatibility test is recommended.

Adding Solvent - Once a desirable color effect is attained, add an equal amount of Psycho Paint ™ Part A. Next, add 200-500 Parts of solvent. Smooth-On’s NOVOCS™ Zero VOC Solvent is recommended. Toluene, Xylene or Naptha are also suitable. Observe all safety precautions when handling combustible or flammable solvents. Mix thoroughly to a uniform color (no streaks).

Applying Psycho Paint™ Using An Air Brush - Dispense mixture into air brush siphon cup / gravity cup. Apply thin layers of paint to the model’s surface until the desired color effect is attained.

Brushing Onto A Platinum Silicone Appliance Or Model - Make sure all surfaces are clean. Add the desired amount of Silc Pig® pigment to Psycho Paint™ Part B and mix thoroughly. Add an equal amount ofPsycho Paint ™ part A and mix thoroughly. Add solvent if desired. You can then apply Psycho Paint ™ with a brush. A common application technique is to use a “stippling” effect.

Important - Pot life of undiluted Psycho Paint ™ (without solvent) is 20 minutes at room temperature.

Curing -
Undiluted Psycho Paint ™ will cure at room temperature in 2 hours. Cure time can be reduced with heat (oven or heat gun). Do not expose to over 100°C. If heat curing, make sure that all solvents have evaporated from model’s surface, before applying heat.

SilTone Pigments

Siltone primary colors

  • SilTone Black /30gr

    Black /1oz

    8,50 EUR

  • SilTone White /30gr

    White /1oz

    8,50 EUR

  • SilTone Red /30gr

    Red /1oz

    8,50 EUR

  • SilTone Blue /30gr

    Blue /1oz

    8,50 EUR

  • SilTone Brown /30gr

    Brown /1oz

    8,50 EUR

  • SilTone Green /30gr

    Green /1oz

    8,50 EUR

  • SilTone Yellow /30gr

    Yellow /1oz

    8,50 EUR

  • SilTone White /500gr

    White /16oz

    128,42 EUR

SilcPig Pigments

SilcPig Silicone Pigments

  • Blue /110 ml

    Blue /4oz

    27,32 EUR

  • Black /110 ml

    Black /4oz

    22,68 EUR

  • Brown /110 ml

    Brown /4oz

    22,68 EUR

  • Green /110 ml

    Green /4oz

    24,09 EUR

  • Red /110 ml

    Red /4oz

    25,50 EUR

  • White /110 ml

    White /4oz

    22,68 EUR

  • Yellow /110 ml

    Yellow /4oz

    25,88 EUR

  • Blood Red /110 ml

    Blood Red /4oz

    46,39 EUR

  • light flesh /110 ml

    light flesh /4oz

    32,98 EUR

  • Medium Flesh /110 ml

    Medium Flesh /4oz

    32,98 EUR

  • Dark Flesh /110ml

    Dark Flesh /4oz

    32,98 EUR

  • Cyan /110ml

    Cyan /4oz

    28,91 EUR

  • Purple /110 ml

    Purple /4oz

    29,02 EUR

Ignite Pigments

Ignite™ Pigments

  • Ignite™ Green /120ml

    Ignite™ Green /4oz

    28,74 EUR

  • Ignite™ Magenta /120ml

    Ignite™ Magenta /4oz

    25,64 EUR

  • Ignite™ Orange /120ml

    Ignite™ Orange /4oz

    25,64 EUR

  • Ignite™ Pink /120ml

    Ignite™ Pink /4oz

    28,74 EUR

  • Ignite Yellow /120ml

    Ignite™ Yellow /4oz

    25,64 EUR

  • Ignite™ Blue /120ml

    Ignite™Blue /4oz

    28,74 EUR

  • Ignite™ Red /120 ml

    Ignite™ Red /4oz

    28,74 EUR

  • Ignite™ white /120ml

    Ignite™ white /4oz

    25,64 EUR

  • Ignite™ Purple /120ml

    Ignite™ Purple /4oz

    25,64 EUR

++

You might also need...

  • Mixing Beakers
  • Measuring Cups & Jars
  • Weighting devices
  • Brushes
  • Protective Gear such as gloves
  • Release agents
Mixing, Measuring & Weighting

Mixing, Measuring & Weighing

Mixing

  • Measuring Cup 30ml

    30ml + graduation

    0,16 EUR

  • Measuring cup 125ml

    125ml + graduation

    0,40 EUR

  • mixing/measuring 350ml

    Mixing and measuring - 350 ml

    0,47 EUR

  • mixing / measuring 700 ml

    Mixing and measuring - 700 ml

    0,52 EUR

  • mixing / measuring 1400 ml

    Mixing and measuring 1400 ml

    0,66 EUR

  • mixing / measuring 2300 ml

    Mixing and measuring - 2300 ml

    1,21 EUR

  • SO mixing cup /473ml

    SO mixing cup /16oz

    0,86 EUR

Mixing

  • SO mixing cup /946ml

    SO mixing cup /32oz

    0,90 EUR

  • SO mixing cup /1892ml

    SO mixing cup /64oz

    2,35 EUR

  • SO mixing cupr /4880ml

    SO mixing cupr /165oz

    2,77 EUR

  • Mixing beaker round 500cc

    500 cc contents

    0,21 EUR

  • mixing beaker 1000cc

    Plastic mixing beaker 1162 ml.

    0,53 EUR

  • Mixing Bowl 2000 ml

    180x180 mm; 2000 cc

    0,75 EUR

  • Flexible mixing cup 500ml

    For gypsum, alginate etc.

    6,65 EUR

Mixing

  • Flexible mixing cup 1750ml

    For gypsum, alginate etc.

    15,98 EUR

  • Syrenge 50ml

    With catheter nozzle.

    7,49 EUR

  • Tongspatels

    Wooden tongue spatula

    2,83 EUR

  • stirring stick 22cm

    220x17x3 mm

    0,04 EUR

  • stirring stick 30cm

    30cm / price per piece

    0,20 EUR

  • Colad Turbomix /per 200

    200 stirrers in dispenser.

    50,73 EUR

  • Turbine Mixer

    Use with electrical drill

    14,63 EUR

Brushes

Brushes

  • flat brush 30mm

    flat disposable brushes

    0,66 EUR

  • flat brush 40mm

    flat disposable brushes

    0,76 EUR

  • flat brush 50mm

    flat disposable brushes

    1,15 EUR

  • flat brush 60mm

    flat disposable brushes

    1,14 EUR

  • flat brush 70mm

    flat disposable brushes

    1,15 EUR

  • Calupaint flat brush 40mm

    Calupaint flat brush 40mm

    2,15 EUR

  • polyesterkwast 20mm

    polyester brush 20mm round

    2,55 EUR

  • polyesterkwast 25mm

    polyester brush 25mm round

    2,90 EUR

  • Polyesterkwast 35mm

    Polyester brush, Flat, 35 mm

    1,83 EUR

  • Polyesterkwast 50mm

    polyester brush 50mm flat

    2,86 EUR

  • Polyester kwast 75mm

    Polyester brush, Flat, 75 mm

    2,75 EUR

  • brush 40mm

    Brush, flat, 40mm.

    2,35 EUR

Protective Gear

Protective Gear

  • Glove Nitrile S

    Glove Nitrile S

    9,10 EUR

  • Glove Nitrile L

    Glove Nitrile L

    9,10 EUR

  • Glove Nitrile M

    Glove Nitrile M

    9,10 EUR

  • Glove Nitrile XL

    Glove Nitrile XL

    9,10 EUR

  • Stenchmask carbon fibre

    Stenchmask carbon fibre

    4,47 EUR

  • Paint spray mask Colad

    Complet easy to wear paint spray mask.

  • 3M 06941 Halfgelaatmasker

    FFA1P2D

    41,76 EUR

  • Filter ABEK1

    For 3M 6200 maskers

    30,47 EUR

  • 3M safety glasses Classic

    3M safety glasses Classic

    12,55 EUR

Release Agents

Release Agents

Spray Releases

  • Safety Info Acmos

  • Acmos 82 aerosol /400gr

    Removable universal release agent/ wax based / aerosol spraycan

    17,05 EUR

  • Ease Release™ 200 /340 gr

    Ease Release™ 200 /340 gr

    17,49 EUR

Spray Releases

Spray Releases

www.formx.biz

- pricing ex VAT
- invoicing ex VAT
- widest product range
- volume discounts

VAT- and Chamber of Commerce registration required.

Orders shipped within the Netherlands will be subject to an additional VAT charge.

our standard discounts

€15.- discount on all orders above net €250.-

Additional discounts will be applied with increasing order volume

from €500,- till €1000,-minus 2%
from €1000,- till €1500,- minus 3%
from €1500,- till €2000,- minus 4%
from €2000,- till €2500,- minus 5%
from €2500,- onward - minus 6%

Make your business more profitable

Do you spend many xxK€ in our webshop? We can help you with a personalized account to make your business more profittable. Contact us at info@formx.nl

(only available through this webshop)

Navigate

BUY SMOOTH-ON AT FORMX

SMOOTH-ON is one of the worlds leading manufacturers of 3D modeling materials for mold-making, casting and special effects.

FormX is a main distributor of SMOOTH-ON in Europe with a wide range of products always on stock. FormX puts great emphasis on customer service and supplies many satisfied clients throughout Europe.

Be a happy client - don't just buy anything, anywhere - buy SMOOTH-ON AT FORMX !

- BEST PRODUCT
- BEST PRICE
- BEST SERVICE

Optional Login



FACEBOOK

FormX Newsletter About us Contact Shipping Applications FormX Academy Terms of Sales Impressum