Show basket (0 Article) My accountShow saved listTo checkout

SO-CURE™

Buy Smooth-On at FormX

Smooth-On is one of the worlds leading manufaturers 3D modeling materials such as mold-making, casting and special effects materials but also industrial casting resins, adhesives and equipment. FormX is main distributor of Smooth-On products in Europe.

SO-CURE™

SO-CURE™ Cure Accelerator is an additive designed to accelerate the cure time of some Smooth-On urethane liquid plastic products without significantly affecting ultimate physical properties. This allows for much faster demolding of a part or casting from a mold.
Technical bulletin So-Cure

SO-CURE™ Safety

- Read the safety information label. Click on the image

- Lisez les informations de sécurité cliquez sur l'image

- Lea la etiqueta de información de seguridad. Haga clic en la imagen

- Lees het veiligheidsinformatie label. Klik op de afbeelding.

- Lesen Sie das Sicherheitsinformationsetikett. Klicken Sie auf das Bild.

Product

SO-Cure products

Instructions

Safety - Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.

Store and use material at room temperature 23°C. This product has a limited shelf life and should be used as soon as possible.

MEASURING & MIXING...

The accelerator is added to Part B by weight and should be thoroughly mixed with Part B before adding Part A. Important: Adding the accelerator drastically reduces the pot life (time you have to mix and pour material) of the liquid plastic product.

Example: To reduce the demold time of Task® 4 from 16 hours to 1 hour, add 2.5 grams of accelerator to 100 grams of Task® 4 Part B. Mix thoroughly for one minute, making sure that you scrape the sides and bottom of your container several times. Next, add 100 grams of Part A and mix thoroughly for one minute, again making sure that you scrape the bottom and sides of your container several times. Do not delay between mixing and pouring, as your Pot Life is about 5 minutes. In one hour, the plastic casting can be demolded from the original mold. Ultimate physical properties will be reached overnight.

Guide

Let us help you find your way.

The list below may help you find what you are looking for via an alternative path.

Help me choose

  • Casting

    a wide range of flexible and rigid casting materials.

  • Composites

    resins, poyester, epoxy, acrylic resin, glass fibres etc.

  • Cosplay

    Products to make your own Cosplay Costumes and Props!

  • Foam

    expanding flexible and rigid foams, rigid blocks.

  • Molding

    flexible and rigid molding for all sorts of objects.

  • Prototyping

    resins and other materials used for rapid prototyping.

  • Restoration

    restoring in- and exterior ornaments and buildings.

  • Special Properties

  • Textile

FormX Newsletter About us Contact Shipping Applications FormX Academy Terms of Sales Impressum