Show basket (0 Article) My accountShow saved listTo checkout

HX-Frisket Masking Latex™ /120 ml

HX-Frisket Masking Latex™ is a removable liquid latex masking fluid. Frisket is non-staining, can be colored, and works with all water-based mediums. It may be used on paper, cardboard, ceramics, glass, leather, metal, paper,and wood. It is not recommended for fabrics. Make sure your substrate is dry before applying and make sure the masking fluid is completely dry before removing.

Product ID: HXFriskMask4oz

Available now

7,46 EUR

additional. 0% VAT and shipping Versand
Weight: 0.2 kg
piece


Instructions

SAFETY FIRST Keep Out of Reach of Children

BE CAREFUL -
Avoid use if you have known allergies to natural latex. Avoid contact with eyes. Flush eyes with water for 15 minutes and seek medical attention. Remove from skin with waterless hand cleaner followed by soap and water. Children should not use thisproduct without adult supervision.

PROCESSING RECOMMENDATIONS

Do not allow HX-Frisket Masking Latex™ to freeze. The material will not be usable. Store and use material at room temperature 23°C. This product has a limited shelf life and shouldbe used as soon as possible. Colder temperatures will slow the working/cure time, while warmer temperatures will reduce working time. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Wash thoroughly after handling.
Keep container closed when not in use.

POURING, USING & PERFORMANCE:

MIXING AND USING:


Stir thoroughly before every use. Brush thin coats (3 to 4) to any surface that needs to be protected. HX-Frisket Masking Latex dries to form a contour-hugging, skin-tight protective coating on porous and non-porous surfaces to protect from damage caused during painting and by over-spray, texture, staining, surface scratches, spills and drops.

HX-Frisket Masking Latex™ fills the gap in masking hard to mask, rough porous surfaces and prevents costly clean up during and upon completion of construction making it the ideal product for artist, commercial, industrial and home users alike.

HX-Frisket Masking Latex™prevents bleeding and peels away cleanly and can be used as an aide in protecting sensitive surfaces against staining and abrasion and is ideal when masking paper
and plastic.

CLEAN UP:

Clean up wet and dry latex with soap and water.

OPTIONAL - COLORING THE RUBBER

FabtoneTM latex colorants can be used to dye the latex while in it’s liquid state.

Guide

Let us help you find your way.

The list below may help you find what you are looking for via an alternative path.

  • Molding

    flexible and rigid molding for all sorts of objects.

  • Casting

    a wide range of flexible and rigid casting materials.

  • Special Properties

  • Composites

    resins, poyester, epoxy, acrylic resin, glass fibres etc.

  • Foam

    expanding flexible and rigid foams, rigid blocks.

  • Restoration

    restoring in- and exterior ornaments and buildings.

  • Prototyping

    resins and other materials used for rapid prototyping.

  • Textile

  • Cosplay

    Products to make your own Cosplay Costumes and Props!

FormX Newsletter About us Contact Shipping Applications FormX Academy Terms of Sales Impressum